Accurate Detection for Material Sorting
The sensor accurately detects whether there is one, two, or no material between its transmitter and receiver, allowing it to classify materials as either single-layer, double-layer, or no-layer.
Stable detection even in harsh environmental conditions
Using ultrasonic technology, which is resilient to influences, reliable detection is achieved even in dirty, dusty, and humid environments.
Non-contact detection
Precisely detects object status and distance using a contactless method.
Switching Outputs: NPN Output: 3 NPN switches, normally open
PNP Output: 3 PNP switches, normally open
Transmitter-receiver spacing: 20-60mm
Blind zone: 7mm in front of the transmitter and receiver
Maximum angular deviation: ±45 degrees from vertical
Operating range: Metal composite panels and films less than 1mm thick, self-adhesive sheets, labels on substrates, paper thicker than 0.01mm, PCBs, silicon wafers
Operating voltage: 10-30V DC, reverse polarity protected
Response time: 10ms
Green LED: Single sheet detected
Yellow LED: No target (air)
Red LED: Double sheet detected
No-load current: ≤30mA
Operating current: 3x200mA, short-circuit/overload protected
Overload protection: 200mA, red and green flashing simultaneously
Voltage drop: ≤2V
Response delay: 10ms
Pulse width: ≥100ms
Impedance: ≥24kΩ
Material Nickel-plated copper sleeve, plastic fittings, glass-filled epoxy resin
IP67 protection rating
Connection type: 2m, 0.14mm² PVC cable
Ambient temperature: -25°C to +70°C (248°C to 343°K)
Storage temperature: -40°C to +85°C (233°C to 358°K)
Weight: 173g
