/
/
LU-K24N Slot-Type Photoelectric Sensor

LU-K24N Slot-Type Photoelectric Sensor

Slot-Type Photoelectric Sensor

 

LU-K24N

 

Equipped with two independent outputs

Ultra-compact, space-saving

Various models available

Newly added output action inversion type

High-speed response

Standard 2m kink-resistant lead wire

Equipped with two independent outputs

 

All models are equipped with two independent outputs: ON when light enters and ON when light is blocked, allowing for different output requirements depending on the location.

 

 

Ultra-compact, space-saving

 

The ultra-compact size contributes to miniaturization and space-saving installations.

 

Various Model Options

With a wide variety of options, including five different shapes, you can choose the model that best suits your installation requirements.

 

Newly added output action reverse type

This model features wiring modifications based on the same Panasonic product, providing a perfect replacement. The original product’s action output wiring order has been changed: black output line 1 turns on when light enters, white output line 2 turns on when light is blocked. (Add “-EC” to the end of the standard model number.)

 

 

High-Speed Response

High-speed response frequency of 2 kHz.

 

Wire Lead

Standard 2m kink-resistant wire.

 

 

Slot Width: 5mm

Standard Detection Object: 0.8mm φ opaque objects

Repeatability: 0.03mm or less

Light Source: Infrared (940nm), Class 1

Switching Mode: Two independent outputs (shade ON and light ON)

Output Mode: NPN/PNP Output: 50mA sink current (residual voltage: 2V or less)

Power Supply Voltage: 5-24V DC ±10%, ripple P-P 10% or less

Current Consumption: 15mA or less

Response Time: 0.25ms or less

Switching Frequency: 2kHz or more

Residual Voltage: 2V or less (50mA)

Protection Circuit: Surge Protection, Short-Circuit Protection, Reverse Polarity Protection

Load Current: 50mA or less

Ambient Illumination: Incandescent Lamp: 3000Lux or less; LED Lamp: 3000Lux or less; Sunlight: 10000Lux or less

Humidity Range: Operating: -25°C to +55°C (non-icing or condensation); Storage: -30°C to +80°C

Ambient humidity: Operating: 35-85% RH; Storage: 5-95% RH

Dielectric strength: AC1,000V, 50/60Hz, 1 minute between charging unit and housing

Insulation resistance: >20mΩ (500V DC) between power terminals and housing

Vibration resistance: 10-55Hz, 1.5mm vertical amplitude, X, Y, and Z directions for 2 hours

Protection rating: IP50

Connection: Lead wire (standard lead length: 2m)

Casing material: PC+ABS

Related