Equipped with two independent outputs
All models are equipped with two independent outputs: ON when light enters and ON when light is blocked, allowing for different output requirements depending on the location.
Strong anti-interference capability
Strong resistance to external interference from stray light.
Two slot width options available
Slot widths are available in 10mm and 15mm options. Choose the one that meets your installation requirements.
High-Speed Response
High-speed response frequency of 1 kHz.
Wire Lead
Supplied with a 2m flex-resistant cable.
Slot Width 10mm
Detection Object: Opaque objects 1mm or larger
Light Source: Infrared (940nm)
Power Supply Voltage: 12-24V DC +10%, Ripple: 10% or less
Output Mode: Normally Open/Normal Closed
Repeatability: 0.03mm or less
Switching Frequency: 1000Hz or more
Residual Voltage: 2V or less (at 100mA)
Indicator: Action Indicator (Red)
Operation Mode: Two independent outputs (ON when blocked, ON when light is present)
Protection Circuit: Surge Protection, Short-Circuit Protection, Reverse Polarity Protection
Current Consumption: 28mA or less
Load Current: 100mA or less
Ambient Light Source: Incandescent Lamp: 3000lux or less; Sunlight: 10000lux or less
Ambient Temperature: -15°C to +55°C (no icing or condensation)
Ambient Humidity: -30% to 70%RH
Insulation Resistance: 50mΩ or more (DC 500V megohmmeter) between charging unit and housing. Voltage withstand: AC 1,000V, 50/60Hz, 1 minute between charging unit and housing. Vibration (endurance): 10-55Hz, 1.5mm amplitude, 2 hours in each of the X, Y, and Z directions. Protective structure: IP50. Connection: 2m/4-core cable. Housing material: PC.
