/
/
LU670-5NA Slot-Type Photoelectric Sensor

LU670-5NA Slot-Type Photoelectric Sensor

Slot-Type Photoelectric Sensor

 

LU670-5NA

Equipped with two independent outputs

Various models available

Added sunlight-resistant function

Integrated overmolding

High-speed response

Standard 2m kink-resistant cable

Equipped with two independent outputs

 

All models are equipped with two independent outputs: light-on/light-off, allowing for different output requirements depending on the application location.

A wide variety of models available

 

With up to six different shapes available, you can choose the model that best suits your installation requirements.

New Sunlight Resistance

 

This product has been improved in terms of beam interference resistance, allowing it to operate normally even under normal sunlight (above 10,000x).

Integrated overmolding

 

The tail boot features integrated overmolding for protection, offering over twice the vibration resistance of existing products.

 

High-speed response

 

High-speed response with a 2 kHz response frequency

 

Wire lead-out

 

2m kink-resistant wire included as standard

Sensing distance: 5mm (groove width)

Standard sensing object: Opaque objects 0.8mm or larger

Repeatability: 0.03mm or less

Light source: Infrared (940nm), Class 1

Indicator: Red

Switch mode: Two independent outputs (shade ON and light ON)

Output mode: NPN/PNP output: 100mA sink current (residual voltage: 2V or less)

Response time: 0.25ms or less

Power supply voltage: 5-24V DC ±10%, ripple P-P 10% or less

Current consumption: 20mA or less

Residual voltage: 2.0V or less (100mA)

Load current: 100mA or less (24V DC)

Protection circuit: Surge protection circuit, short-circuit protection, reverse polarity protection

Response frequency: 2kHz or more

Insulation resistance: >20MΩ (500V DC) between power terminal and case

Withstand voltage: AC1000V, 50/60Hz, 1min, between charging unit and case

Ambient illumination: Incandescent lamp ≤ 3000 Lux; LED lamp ≤ 3000 Lux; Sunlight ≤ 10000 Lux

Ambient temperature range: Operating: -25°C to +55°C; Storage: -30°C to +80°C (no icing or condensation)

Ambient humidity range: Operating: 35% to 85% RH; Storage: 35% to 85% RH (no icing or condensation)

Vibration resistance: 10-55Hz, 1.5mm amplitude, 2 hours in each of the x, y, and z directions

Protective structure: IP50

Connection: 2m/4-core cable

Casing material: PC

Related